Датчик движения уличный с возможностью установки на высоте Ajax MotionCam Outdoor HighMount PhOD Jeweler беспроводной белый

Описание Датчик движения уличный с возможностью установки на высоте Ajax MotionCam Outdoor HighMount, PhOD, Jeweler, беспроводной, белый

MotionCam Outdoor HighMount (PhOD) Jeweller — это беспроводной датчик движения, разработанный прежде всего для удаленных объектов, складов и промышленных комплексов. Однако его также можно использовать в офисе или частном доме. Устройство можно установить на высоте от 2 до 4 m, охватив большую площадь без слепых зон. С помощью встроенной камеры можно быстро оценить ситуацию на охраняемом объекте. Это возможно благодаря четырем типам фотоверификации: по тревоге, сценарию, запросу и по расписанию. Фильтр ложных тревог распознает факторы, не представляющие угрозы, такие как колебания веток деревьев или тепловые потоки. Металлический поворотный кронштейн позволяет регулировать угол обзора.

Captures movement where it is most needed

Keep any commercial premises secure day and night, with no blind zones or false alarms. MotionCam Outdoor HighMount (PhOD) Jeweller detects movement at a distance of 15 m. The detector instantly takes a series of photos so the user can check the reason for the alarm. All alarms are thoroughly checked at both software and hardware levels. At the software level, the device uses algorithms such as SmartDetect and LISA. At the hardware level, it is equipped with two types of sensors - two PIR sensors and a microwave sensor — to provide dual motion detection. Also, a Fresnel lens differentiates between the PIR diagrams of people and thermal noise.

Wherever there is a risk of intrusion

• High-risk property
• Gas production station
• Production facility
• Construction site

No intruder goes unnoticed

PIR sensors

MotionCam Outdoor HighMount (PhOD) Jeweller has two PIR sensors to ensure accurate movement detection. One sensor is responsible for near-field movement detection, while the other detects movement in the far-field movement detection zone.

K-band microwave sensor

The device responds only when both PIR and microwave sensors are triggered. When the PIR sensor detects the movement of an object with a temperature similar to that of the human body, the device performs a radio wave scan using the K-band microwave sensor. This is how the dual motion detection technology works. Unlike traditional X-band sensors, the K-band sensor offers enhanced precision and superior energy efficiency. This results in minimal impact on battery lifespan and significantly fewer false alarms. Additionally, the sensor is completely safe and does not harm human health.

Thermal interferences filter

In armed mode, the detector constantly analyzes the thermal diagram from the PIR sensors, including the IR radiation intensity, thermal spot size, movement speed, time spent in the detection zone, and other parameters. The SmartDetect algorithm filters out potential false triggers such as headlights, lighting devices, and heat flows instantly and with high accuracy. As a result, the detector accurately responds to movement without false alarms.

---

Temperature compensation

Temperature compensation is a software mechanism that maintains the contrast of the thermal diagram even if the ambient temperature is close to the temperature of the human body. With each ambient temperature measurement, the detector corrects the PIR sensors’ data according to the coefficient table stored in its memory. The detector is effective over the entire operating temperature range.

Sensitivity level

MotionCam Outdoor HighMount (PhOD) Jeweller features three sensitivity levels that can be adjusted through an Ajax app. The optimal sensitivity level depends on the facility type, the presence of potential sources of false alarms, and the specifics of the protected area. A low sensitivity level is suitable for areas prone to false alarms; normal sensitivity is ideal for most facilities, and high sensitivity is recommended for areas with no obstacles.

Professional installation

Proper installation and configuration of a motion detector are key to detecting threats quickly. MotionCam Outdoor HighMount (PhOD) Jeweller should be placed on a vertical surface at a height of 2–4 m. The device’s tilt angle must be adjusted using the swivel mount. The detector sensors should be directed to the expected intrusion path.

Peace of mind on demand

• HDR technology for clear photos
• IR illumination for low light conditions
• The first photo is delivered in less than 9 second
• Up to 5 photos in a series

MotionCam Outdoor HighMount (PhOD) Jeweller is equipped with a camera to quickly assess the situation at the site. The device takes a series of photos as soon as it detects movement. A series of photos is combined into a GIF or MP4 format to show how the situation develops in the dynamics. The outdoor detector can take a series of photos by request of the user from an Ajax mobile app, regardless of the security mode. Furthermore, the device can take photos on a set schedule or when selected devices in the system activate an alarm.

Unique wireless technologies

MotionCam Outdoor HighMount (PhOD) Jeweller uses Jeweller and Wings proprietary radio protocols for reliable communication.

Scaled and comprehensive

ReX 2 Jeweller range extender boosts the radio range of all Ajax devices via Jeweller and ensures stable communication even through steel and concrete via Ethernet using the wire as the additional communication channel. Up to 5 range extenders can operate within one Ajax system to expand the network twice as big, covering multistorey buildings with underground parking and basements.

Ready for heat and cold

MotionCam Outdoor HighMount (PhOD) Jeweller is ready to operate in any weather. The device withstands heat up to +60 °С and cold down to −25 °С. Additionally, the detector can be installed with the hood to protect the anti-masking system from rain and snow.

Effortless installation and setup

MotionCam Outdoor HighMount (PhOD) Jeweller is ready to operate straight out of the box. Ajax apps help quickly make the device a part of the system: simply pair the device with the hub by scanning the QR code. In the Ajax PRO app for installers, it is possible to check the camera’s field of view and maximum detection zone with the Motion detection area option. Remote configuration and monitoring are also available via PRO apps.